• 1/8"-4" Tap Machines

    Hot, Wet or Pressure Tapping Machines

    1/8" - 1 1/4" Micro Hot Tapping Machine

    This tapping machine will perform 1/8"- 1 1/4" hot taps. This machine uses solid drill bits for performing the hot tap under pressure for branch connections up to 150 psi @ 250 D. F maximum. Total: $595.00 + Shipping
    More Information . . .

    Call us today! 951-223-5574
    or email us

    1/8"-3/4" Micro Hot Tapping Machine
    1/2" Micro Hot Tapping Machine

    This tapping machine will perform 1/2" hot taps. This machine uses solid drill bits for performing the hot tap under pressure for branch connections up to 150 psi @ 250 D. F maximum. Total: $595.00 + Shipping
    More Information . . .

    Call us today! 951-223-5574
    or email us

    1/8"-3/4" Micro Hot Tapping Machine
    3/4"-1 1/4" Mini Hot Tapping Machine

    This tapping machine will perform 3/4"-1 1/4" hot taps. This machine uses solid drill bits for performing the hot tap under pressure for branch connections of up to 175 psi @ 250 D. F maximum. Total: $955.00 + Shipping
    More Information . . .

    Call us today! 951-223-5574
    or email us

    1/2"-1" Mini Hot Tapping Machine
    3/4"-2" Boring Bar Hottap Machine

    This hottap machine will perform 3/4"-2" hot taps. This package can be upgraded at any time to perform up to 6" hot taps. WT machine is rated for: 150 psi @ 250 Deg F. Total: $1,195.00 + Shipping
    More Information . . .

    Call us today! 951-223-5574
    or email us

    3/4"-2" Hot Tap Machine
    1/2"-2" Hot Tapping Machine

    This tapping machine will perform 1/2"-2" hot taps. WT machine is rated for: 300 psi @ 100 deg F 250 Deg F @ 200 psi available high temp packing to 495 deg @ 200 psi. SALE Total: $3,550.00 + Shipping
    More Information . . .

    Call us today! 951-223-5574
    or email us

    3/4"-2" Hot Tap Machine
    3/4"-2" Thermal Well Intallation Tool & Hottap Machine

    1/2" and 3/4" Thermal Wells into live pipeline systems with ease. Hot taps 3/4"-2" pipline 250 psi @ 300 deg F. Total: $1,195.00 + Shipping
    More Information . . .

    Call us today! 951-223-5574
    or email us

    1/2"-3/4" Thermowell Tool and Hot Tapping Machine
    1/2"-4" Hot Tapping Machine

    This tapping machine will perform 1/2"-4" hot taps. WT machine is rated for: 300 psi @ 100 deg F 250 Deg F @ 200 psi available high temp packing to 495 deg @ 200 psi. Total: $5,250.00 + Shipping
    More Information . . .

    Call us today! 951-223-5574
    or email us

    1/2"-4" Tapping Machine
    1/2"-4" Air Drive Hot Tapping Machine

    This tapping machine will perform 1/2"-4, and is equipped with a very strong Air motor. This machine is designed for the NO SPARK applications on gas hot taps. This package can be upgraded at any time to perform up to 4" Total: $9,865.00 + Shipping
    More Information . . .

    Call us today! 951-223-5574
    or email us

    1/2"-6" Air Drive Tapping
  • 1/2"-24" Tap Machines

    Hot, Wet or Pressure Tapping Machines

    1/2"-4" Heavy Duty Quad Rail Hot Tapping Machine

    Design eliminates any twisting or flexing under extreme hot taps. Allows the user to install the drive motor 4 different directions depending on the space or location of the hot tap! Different length Quad rails give the machine the ability to perform hot taps in tight locations. Total: $5,995.00 + Shipping
    More Information . . .

    Call us today! 951-223-5574
    or email us

    1/2"-4" Heavy Duty Quad Rail Hot Tapping Machine
    1/2"-6" Heavy Duty Quad Rail Hot Tapping Machine

    Design eliminates any twisting or flexing under extreme hot taps. Allows the user to install the drive motor 4 different directions depending on the space or location of the hot tap! Different length Quad rails give the machine the ability to perform hot taps in tight locations.
    More Information . . .

    Call us today! 951-223-5574
    or email us

    1/2"-6" Heavy Duty Quad Rail Hot Tapping Machine
    1/2"-4" High Pressure Hot Tapping Machine

    Severe Duty 1/2"-4" Tapping machine 18" of travel, This machine is time tested and heavy duty! Can be used on Gas,water,steam and many other severe duty applications! also compatible for line stopping! Air and electric drives available. This machine comes with Packing wrench and D clips for installing Pilot drill/cutter mandrel. Extra High temp packing and parts in stock! 1450 psi@ 100 deg F 700 deg. F @ 700 PSI Total: $5,250.00 + shipping
    More Information . . .

    Call us today! 951-223-5574
    or email us

    1/2"-4" High Pressure Tapping Machine
    1/2"-8" High Pressure Hot Tapping Machine

    Severe Duty 1/2"-8" Tapping machine. 28" of travel., This machine is time tested and heavy duty! Can be used on Gas,water,steam and many other severe duty applications! also compatible for line stopping! Air and electric drives available. This machine comes with Packing wrench and D clips for installing Pilot drill/cutter mandrel. Extra High temp packing and parts in stock! 1450 psi@ 100 deg F 700 deg. F @ 700 PSI
    More Information . . .

    Call us today! 951-223-5574
    or email us

    1/2"-6" High Pressure Tapping Machine
    3"-12" Quad Rail Hot Tapping Machine

    3in-12in Quad Rail Tapping Machine This machine performs 3"-12" under pressure taps Hydraulic, Air or Electric drives available Gear driven for the ultimate in performance and reliability
    More Information . . .

    Call us today! 951-223-5574
    or email us

    3"-12" Quad Rail Tapping Machine
    3"-16" Quad Rail Hot Tapping Machine

    3in-16in Quad Rail Tapping Machine Package This machine performs 3"-16" under pressure taps 40" of overall travel Hydraulic or electric drive Gear driven for the ultimate in performance and reliability
    More Information . . .

    Call us today! 951-223-5574
    or email us

    3"-16" Quad Rail Tapping Machine
    12"-24" Quad Rail Hot Tapping Machine

    12in-24in Quad Rail Tapping Machine This machine performs 12"-24" under pressure taps Use Hydraulic or Electric drives on the same machine depending on what you need.
    More Information . . .

    Call us today! 951-223-5574
    or email us

    12"-24" Quad Rail Tapping Machine
  • Hydro Packs

    Hydraulic Power Packs and Units

    13 H. 8 GPM. 2000 PSI. Gasoline Hydro Pack

    These items are Installed on this line of Power Units. This hydraulic power pack is the perfect unit for our line of smaller 3"-12" hydraulic tapping machines Add a wheel package and make it a portable unit!
    More Information . . .

    Call us today! 951-223-5574
    or email us

    13 H. 8 GPM. 2000 PSI. Gasoline Hydro Pack
    24 H. 15 GPM. 2000 PSI. Gasoline Hydro Pack

    24 H.P Honda heavy duty series 15 GPM @ 2000 psi. This model power pack is used for our medium sized hot tapping machines 4"-16". Many different GPM and Pressure ratings available, please call and we can customize any power pack to fit your needs.
    More Information . . .

    Call us today! 951-223-5574
    or email us

    24 H. 15 GPM. 2000 PSI. Gasoline Hydro Pack
    25 H. 15 GPM. 2000 PSI. Diesel Hydro Pack

    25 Horse Power Diesel Hydraulic Power Packs 25 HP Kubota Liquid Cooled Diesel Engine E.P.A TIER 111 Exhaust Emission Compliant 4-Stroke Diesel Power Pack Direct Fuel Injection 12 Gallon Fuel Tank
    More Information . . .

    Call us today! 951-223-5574
    or email us

    25 H. 15 GPM. 2000 PSI. Diesel Hydro Pack
    35 H. 25 GPM. 1500 PSI. Diesel Hydro Pack

    35 Horse Power Diesel Hydraulic Power Packs 35 HP Kubota Liquid Cooled Diesel E.P.A TIER 111 Exhaust Emmision Compliant Liquid-Cooled 4-Stroke Diesel Power Pack Direct Fuel Injection 25 Gallon Fuel Tank
    More Information . . .

    Call us today! 951-223-5574
    or email us

    35 H. 25 GPM. 1500 PSI. Diesel Hydro Pack
    10 H. 8 GPM. 2000 PSI. Electric Hydro Pack

    8 GPM @ 2000 psi. This hydraulic power pack is perfect for indoor hot tapping or other applications. Pair this up with our 3"-12" hydraulic tapping machine and tap anywhere indoors!
    More Information . . .

    Call us today! 951-223-5574
    or email us

    10 H. 8 GPM. 2000 PSI. Electric Hydro Pack
    25 H. 20 GPM. 2000 PSI. Electric Hydro Pack

    28 GPM @ 2000 PSI This unit is designed for our larger custom line of tapping machines for indooe use. Can be made with a skid type of mounting paltform or a custom cage for crane lifting. Please call for a custom quote and design spec
    More Information . . .

    Call us today! 951-223-5574
    or email us

    25 H. 20 GPM. 2000 PSI. Electric Hydro Pack
    40 H. 25 GPM. 2000 PSI. Electric Hydro Pack

    28 GPM @ 2000 PSI This unit is designed for our larger custom line of tapping machines for indooe use. Can be made with a skid type of mounting paltform or a custom cage for crane lifting. Please call for a custom quote and design spec.
    More Information . . .

    Call us today! 951-223-5574
    or email us

    40 H. 25 GPM. 2000 PSI. Electric Hydro Pack
    Vertical Hydraulic Power Units

    Vertical Power Units offer dependble, quiet, hydraulic power for many demanding industrial/commercial applications. All units use T.E.F.C. 1725 R.P.M. motors. This series of hydraulic power units targets many requirements needing an economical power house. The broad product line offers solutions for applications requiring Single-Stage or Double-Stage Hydraulic Pumps.
    More Information . . .

    Call us today! 951-223-5574
    or email us

    Vertical Hydraulic Power Units
  • Saddles

    Tapping Saddles and Services Saddles

    Copper Pipe Saddles/Sleeves

    These saddles/sleeves are specifically designed for use on copper mains. Our saddles can be used on domestic water, heating hot water, Air, natural gas, glycol and sewage mains. All saddle have a stainless steel IP male thread for easy installation of you full port ball valve. Please call with any questions and we will gladly help you pick the correct saddle for your application.
    More Information . . .

    Call us today! 951-223-5574
    or email us

    Copper Pipe Saddles/Sleeves
    PVC/Steel Saddles/Sleeves

    These saddles/sleeves are designed specifically for steel and pvc mains They can be used on domestic water, heating hot water, air, natural gas, glycol and sewage mains. All saddles have a stainless steel IP male thread for easy installation of you full port ball valve. If you have any questions about these tapping saddles please call and we can help you pick the correct saddle for your needs.
    More Information . . .

    Call us today! 951-223-5574
    or email us

    PVC/Steel Saddles/Sleeves
  • Fittings

    Pipe Fittings

    Qualitec Fittings

    3/4"-4" linestop fittings. Each fitting comes with completion plug and cap 300 psi max rating
    More Information . . .

    Call us today! 951-223-5574
    or email us

    Qualitec Fittings
    Therm-o-Well Fittings

    1/2" & 3/4" thermowell fittings are designed to be welded onto steel mains. This fitting allows a well to be installed into a live main under pressure.Once the fitting is welded in place you can install a ball valve or gate valve on the outside of the fitting. Once this is performed, you can install our WT-3/4-2" Hot Tapping Machine and solid bit to perform the hottap.
    More Information . . .

    Call us today! 951-223-5574
    or email us

    Therm-o-Well Fittings
    Full Wrap Fittings

    Full Wrap hot tap fittings are designed to be welded onto CMLC pipelines for structural support on the thin walled steel pipe. we start off with our standard ANSI 150 lb flanged hot tap fitting and design a wrapper to be installed and welded to give support during and after the hot tap.
    More Information . . .

    Call us today! 951-223-5574
    or email us

    Full Wrap Fittings
    Contoured Hottap Fittings

    Contoured Hottap We build contoured Weld fittings designed for ANSI 150 lb and ANSI 300 lb.flanged connections.
    More Information . . .

    Call us today! 951-223-5574
    or email us

    Contoured Hottap Fittings
    Custom Weld Fittings

    We offer Custom weld fittings for hot taps All of our weld nozzle fittings are designed and hand made to ensure proper installation with most fittings built off of ANSI 150 or ANSI 300 lb carbon steel flanges or stainless steel.
    More Information . . .

    Call us today! 951-223-5574
    or email us

    Custom Weld Fittings
  • Freeze Kits

    Pipe Freeze Kits

    1/2"-4" Pipe Freeze Kit

    WWT-400 Pipe Freezing kit for 1/2"-4" Pipes eliminates the need to drain systems and to shut down operating equipment when making pipe repairs. Pipe freezing is a simple yet cost effective method of performing pipe maintenance or line modifications without shutting down your whole system.
    More Information . . .

    Call us today! 951-223-5574
    or email us

    1/2"-4" Pipe Freeze Kit
    1/2"-4" Dual Pipe Freeze Kit

    WWT-400D Dual Pipe Freezing kit for 1/2"-4" Pipes eliminates the need to drain systems and to shut down operating equipment when making pipe repairs. Pipe freezing is a simple yet cost effective method of performing pipe maintenance or line modifications without shutting down your whole system.
    More Information . . .

    Call us today! 951-223-5574
    or email us

    1/2"-4" Pipe Freeze Kit
    6"-8" Dual Pipe Freeze Kit

    WWT-600D Dual Pipe Freezing kit for 1/2"-6" Pipes eliminates the need to drain systems and to shut down operating equipment when making pipe repairs. Pipe freezing is a simple yet cost effective method of performing pipe maintenance or line modifications without shutting down your whole system.
    More Information . . .

    Call us today! 951-223-5574
    or email us

    1/2"-6" Dual Pipe Freeze Kit
  • Holesaws

    Holesaw Cutters

    High Speed Steel Hole Saw Cutters

    High speed holesaws with a standard backing plate In addition We also Offer custom heavy duty carbide,diamond and tool steel holesaw cutters for most sizes 2 1/2"-60" and larger if needed.
    More Information . . .

    Call us today! 951-223-5574
    or email us

    High Speed Steel Hole Saw Cutters
    Carbide Hole Saw Cutters

    Carbide holesaws with a standard backing plate In addition We also Offer custom heavy duty carbide,diamond and tool steel holesaw cutters for most sizes 2 1/2"-60" and larger if needed.
    More Information . . .

    Call us today! 951-223-5574
    or email us

    Carbide Hole Saw Cutters
    Carbide Tipped Hole Saw Cutters

    Carbide tipped Holesaws designed for use with our Line of Hot tapping machines Water works Tools line of  double toothed hot tapping cutters can be made in any sizes and depths for line stopping to hot tapping. all of our cutters featured a brazed in carbide segments for long life and exceptional performance. All of our holesaws can be returned for repair and installation of new carbide cutting segments.
    More Information . . .

    Call us today! 951-223-5574
    or email us

    Carbide Tipped Hole Saw Cutters
    Double Stack Hole Saw Cutters

    Double Stack Holesaws come in either carbide tipped or high speed steel. These custom made holesaws have about 3.25" cutting depth with a heavy duty 3/16" thick steel backing plate. Please specify high speed steel or carbide tipped when ordering. if you do not see a size you need please call as we have the ability to build almost any size! Other options available are triple stack and custom depths.
    More Information . . .

    Call us today! 951-223-5574
    or email us

    Double Stack Hole Saw Cutters
    3/4"-24" PVC Hole Saw Cutters

    PVC carbide tipped cutters These cutters are specifically designed for cutting through Plastic or PVC pipe. Extra deep reliefs assure the chips are pushed out and do not bind up the cutter. Many different backing plate designs available for all types of tapping machines. Please call to get your custom quote today.
    More Information . . .

    Call us today! 951-223-5574
    or email us

    3/4"-24" PVC Hole Saw Cutters
    Diamond Tipped Hole Saw Cutters

    3/4"-24" PVC Plastic Deep Carbide Tipped Cutters These cutters are specifically designed for cutting through Plastic or PVC pipe. Extra deep reliefs assure the chips het pushe out and do not bind up the cutter.
    More Information . . .

    Call us today! 951-223-5574
    or email us

    Diamond Tipped Hole Saw Cutters
    Tool Steel Hole Saw Cutters

    Tool Steel Hole Saw Cutters Product images and information coming soon.
    More Information . . .

    Call us today! 951-223-5574
    or email us

    Tool Steel Hole Saw Cutters
    Custom Carbide Tipped Hole Saw Cutters

    These Cutsom Carbide Tipped Holesaws can be customized to fit your type of hot tapping machines. We can take your blue prints and manufracture a double toothed hot tapping cutter made in any sizes and depths for line stopping to hot tapping. All of our holesaws can be returned for repair and installation of new carbide cutting segments.
    More Information . . .

    Call us today! 951-223-5574
    or email us

    Custom Carbide Tipped Hole Saw Cutters
  • Drill Bits

    Pilot Drill Bits for Coupon Retention

    1/2"-6" Pilot Drill Bits

    Our 1/2"-6" pilot drill bits are designed to catch the coupon or slug you have cut out of the pipe. Our pilot drill bits have dual holes in the flutes so you can run 2 sets of retention wire to ensure 100% positive retention of the coupon.
    More Information . . .

    Call us today! 951-223-5574
    or email us

    1/2"-6" Pilot Drill Bits
    3"-24" Pilot Drill Shafts and Tips

    Pilot Drills are specifically made for our line of larger hot tapping machines. 3"-24".The pilot drills are designed with the retention wires or keepers to catch the coupon. we designed the pilot drill with optional holes in the main body do so you can set the depth of the pilot in the cutter depending on the size of hot tap. If you need custom sizes for your machine please call and we'll be glad to help!
    More Information . . .

    Call us today! 951-223-5574
    or email us

    3"-24" Pilot Drill Shafts and Tips
  • Plug Tools

    Line Stopping Machines

    3/4"-4 Linestop Machine

    Coming soon... Please check back...
    More Information . . .

    Call us today! 951-223-5574
    or email us

    Pic coming soon
    4"-12" Linestop Machines

    250 PSI@ 200 deg. F Linestop capabilities Our line of WWT-250P line stopping equipment is designed to be easy to install in many pipeline applications.
    More Information . . .

    Call us today! 951-223-5574
    or email us

    4"-12" Linestop Machines
    4"-12" High Pressure Linestop Machines

    Coming soon... Please check back...
    More Information . . .

    Call us today! 951-223-5574
    or email us

    Pic coming soon
     
  • Rentals

    Rent a machine that can tap up to 6" and retain coupon.

    1/2"-2" Hot Tapping Machine

    Rent this tapping machine that will perform 1/2"-2" hot taps. This machine is rated for: 300 psi @ 100 deg F 250 Deg F @ 200 psi available high temp packing to 495 deg @ 200 psi. Call for pricing.
    More Information . . .

    Call us today! 951-223-5574
    or email us

    3/4"-2" Hot Tap Machine
    1/2"-6" Hot Tapping Machine

    Rent this tapping machine that will perform 1/2"-6" hot taps. WT machine is rated for: 300 psi @ 100 deg F 250 Deg F @ 200 psi available high temp packing to 495 deg @ 200 psi. Call for pricing.
    More Information . . .

    Call us today! 951-223-5574
    or email us

    1/2"-4" Tapping Machine
  • Adapters

    Tapping Adapters

    1/2"-6" Tapping Adapters

    4" & 6" 150 lb. threaded flanged adaptors designed to be used with our WT-3/4"-6" line of tapping machines.
    More Information . . .

    Call us today! 951-223-5574
    or email us

    1/2"-6" Tapping Adapters
    2"-6" High Pressure Tapping Adapters

    High pressure machines 150 lb. 300 lb. 600 lb. These adaptors are designed for use with our Severe duty Tapping machines 1/2"-6" line of machines.
    More Information . . .

    Call us today! 951-223-5574
    or email us

    2"-6" High Pressure Tapping Adapters
    3"-24" MJ Bolt Tapping Adapters

    ANSI 150 lb adaptor aso drilled for MJ bolt holes 3/4" testing/blow off port
    More Information . . .

    Call us today! 951-223-5574
    or email us

    3"-24" MJ Bolt Tapping Adapters

Diamond Tipped Hole Saw Cutters

Info coming soon...